Edelrid G-Screamer Oasis 15cm Climbing Shock Absorber

Edelrid G-Screamer Oasis 15cm Climbing Shock Absorber

Regular price$59.95
/
Tax included. Shipping calculated at checkout.

Colour
Description

The G-SCREAMER is a small, light HMPE sling with an integrated, compact shock absorber that can offer important safety reserves in alpine terrain or when big wall or ice climbing. With a length of 15 cm, it is hung between two carabiners like a quickdraw sling and used as protection in the case of questionable anchor points and/or larger gaps so as to minimize the load on such anchor points. In the event of a fall, the shock absorber deploys, absorbing energy and reducing the impact force on the anchor point to less than 4 kN. The total length following the full deployment of the shock absorber is 100 cm. Thanks to its minimal weight of less than 50 g, the G-SCREAMER is only negligibly heavier than a conventional quickdraw sling while still offering a major safety reserve when attached to a harness. As an additional innovative use, when combined with rope clamps pursuant to EN 567, the G-SCREAMER fulfills the dynamic requirements established in EN 15151-1 (braking devices with manually assisted locking) so as to enable belaying with rope clamps. This combination vastly reduces the probability of rope damage if the follower falls.

Features
  • HMPE sling with integrated, compact shock absorber – developed with Simon Gietl
  • Areas of use: alpine, big wall, and ice climbing with questionable anchor points
  • Reduces the dynamic impact force on the anchor point to less than 4 kN
  • 3 kN static response force
  • With a weight of less than 50 g, only negligibly heavier than a conventional quickdraw sling
  • Braking distance 85 cm (total deployed length: 100 cm)
  • The combination of a G-SCREAMER and rope clamp pursuant to EN 567 fulfills the dynamic requirements established in EN 15151-1 (braking device with manually assisted locking) and can therefore be used to belay a follower
  • Must not be used to substitute a via ferrata lanyard
Specs
  • Minimum breaking strength: 22 kN
  • Material: HMPE
  • Low stock - 2 items left
  • Backordered, shipping soon

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

Pairs well with

You may also like