Emergency Services

The Summit Gear Cliff Edge Safety Belt is an indispensible piece of equipment for safe working in exposed locations. It is designed to limit to range of movement of the individual when attached to a safety line, and it is not intended as a substitute to a sit or full body harness.

Features:

• Easily identifiable tie in point.
• Generous size (can be trimmed to size).
• Durable webbing and strong, lightweight buckles.
• Also holds up your pants!
• Tested to failure at 800kg

• 44mm webbing webbing
• Alloy buckle

NOTE: CARABINER SHOWN IN PHOTO IS FOR ILLUSTRATION PURPOSES ONLY, AND IS NOT INCLUDED WITH BELT.

While Summit Gear products are shown as being in stock, we often have to make them to order. Please call (02 4782 3018) to confirm the timeframe to produce and ship your order.

The Summit Gear Splat Mat is designed to assist helicopter crews during "mopping up" operations following bushfires.

Features:

• High visibility directional arrow - easy to spot from the air.
• Heavy duty, easy to clean and  non water absorbent fabrics.
• Large corner loops to peg to the ground.
• Rolls into its own storage pouch.
• Storage pouch can be hung from either end for ease of storage in vehicle or shed.

Dimensions: 60cm x 90cm

While Summit Gear products are shown as being in stock, we often have to make them to order. Please call (02 4782 3018) to confirm the timeframe to produce and ship your order.

The Summit Gear Jindabyne Cockatoo has been developed in conjunction with National Parks Fire Management Officers to satisfy the needs of remote area fire crews. It is a large capacity daypack (45 litres) that carries beautifully thanks to the full internal frame harness. This is a step away from most daypacks that have relatively simple harnesses, and the extra support that the harness provides has demonstrated advantages in regard to user performance and reduced downtime. A range of extra features including massive hydration bladder capacity, radio modules and high visibility reflective make the Jindabyne Cockatoo the only choice for remote area fire crews.

Features:

• Full internal frame harness for all day work comfort:
  Frame can be custom shaped to the users body
  Harness will not sag, distort or change shape under heavy loads
• Radio module for ease of communication
• 3M reflective for night safety
• Side "access" pockets for fuel or water bottles
• Prominent locations for identity / organisation badges
• Two external pockets

Harness size:

• S/M for the shorter people
• M/L for the taller folks

Capacity:

• S/M = 40 litres
• M/L = 45 litres

Weight: 1.6kg

While Summit Gear products are shown as being in stock, we often have to make them to order. Please call (02 4782 3018) to confirm the timeframe to produce and ship your order.

The Summit Gear Jindabyne Cockatoo has been developed in conjunction with National Parks Fire Management Officers to satisfy the needs of remote area fire crews. It is a large capacity daypack (45 litres) that carries beautifully thanks to the full internal frame harness. This is a step away from most daypacks that have relatively simple harnesses, and the extra support that the harness provides has demonstrated advantages in regard to user performance and reduced downtime. A range of extra features including massive hydration bladder capacity, radio modules and high visibility reflective make the Jindabyne Cockatoo the only choice for remote area fire crews.

Features:

• Full internal frame harness for all day work comfort:
  Frame can be custom shaped to the users body
  Harness will not sag, distort or change shape under heavy loads
• Radio module for ease of communication
• 3M reflective for night safety
• Side "access" pockets for fuel or water bottles
• Prominent locations for identity / organisation badges
• Two external pockets

Harness size:

• S/M for the shorter people
• M/L for the taller folks

Capacity:

• S/M = 40 litres
• M/L = 45 litres

Weight: 1.6kg

While Summit Gear products are shown as being in stock, we often have to make them to order. Please call (02 4782 3018) to confirm the timeframe to produce and ship your order.

This configuration consists of the Modular Harness, Modular Waistbag, Modular Insulated Hydration Sleeve and Modular Overnight Pack.

The Overnight Pack can be quickly detached for storage of gear, leaving you with a pack ready for any job. Low weight distribution makes it perfect for tasks that involve the use of tools like rake hoes etc. Good freedom of movement around the shoulders and back ventilation.

Modular Harness

• Fully padded hip belt with lumbar support.
• Padded shoulder straps.
• Sewn webbing attachment points for connecting the Waistbag and a range of accessories.
• 1000 denier Cordura externally.
• Ventilated mesh on the inside of the shoulder straps and hip belt.
• Red haul/winch connection loop

Modular Waistbag

• 7 litre capacity
• Large main compartment with an internal clear sleeve for storing documents etc.
• Wide opening zip for easy access.
• Smaller zipped compartment with external access.
• 2 x 38mm webbing attachments points for strength and security.
• Attachment system does not rely on clips for reliability.
• 1000 denier Cordura.
• Large gauge YKK zips.
• Compression straps.
• Reflective strip.

Overall Weight: 1.82kg

Overall Capacity: 40 litres not including accessories

While Summit Gear products are shown as being in stock, we often have to make them to order. Please call (02 4782 3018) to confirm the timeframe to produce and ship your order.

The Winch 2 has been designed in conjunction with remote area fire crews as a winching bag suitable for chainsaw kits. The "continuous" winching handle wraps around the entire bag (not just sewn into a seam). Given the heavy loads carried in this bag, we have intentionally excluded centre handles to stop one person carrying the bag and potentially injuring themselves. The Winch 2 must be carried by two people. This bag will continue to be a solid workhorse for years to come.

Features:

• Suitable for chainsaw kits
• Full strength winching / haul loop
• Clean design for efficient helicopter use
• Double thickness ends for durability
• Compression system to stablise load
• Triple stiched seams for long life
• "Roll up strap" for clean winching of an empty bag back to the helicopter. Watch clip below for more details.

Dimensions: 90cm x 30cm x 30cm

Weight: 1.1kg

While Summit Gear products are shown as being in stock, we often have to make them to order. Please call (02 4782 3018) to confirm the timeframe to produce and ship your order.

he Winch 2 DOUBLE is a burly addition to the Summit Gear range of Winching Bags. It features a removable inner liner constructed of CT1000 (reinforced vinyl) for superior durability.

The Winch 2 has been designed in conjunction with remote area fire crews as a winching bag suitable for chainsaw kits. The "continuous" winching handle is full strength (not sewn into a seam) and therefore will never fail, regardless of the load in the bag. Given the heavy loads carried in this bag, we have intentionally excluded centre handles to stop one person carrying the bag and potentially injuring themselves. The Winch 2 must be carried by two people. This bag features no redundancies, and will continue to be a solid workhorse for years to come.

Features:

• Suitable for chainsaw kits
• Removable CT1000 lining for superior durability. It is very easy to clean because the fabric will not absorb liquids (eg. fuel spills)
• Full strength winching / haul loop
• Clean design for efficient helicopter use
• Double thickness ends for durability
• Compression system to stablise load
• Triple stiched seams for long life
• "Roll up strap" for clean winching of an empty bag back to the helicopter. Watch clip below for more details.

Dimensions: 90cm x 30cm x 30cm

Weight: 2.4kg

While Summit Gear products are shown as being in stock, we often have to make them to order. Please call (02 4782 3018) to confirm the timeframe to produce and ship your order.

The Summit Gear Winch 3 bag has been designed in conjunction with remote area fire crews as a winching bag suitable for rake hoe kits. The "continuous" winching handle is full strength (not sewn into a seam) and therefore will never fail, regardless of the load in the bag. Given the heavy loads carried in this bag, we have intentionally excluded centre handles to stop one person carrying the bag and potentially injuring themselves. The Winch 3 must be carried by two people. This bag features no redundancies, and will continue to be a solid workhorse for years to come.

Features:

• Suitable for rake hoes without removable heads
• Full strength winching / haul loop
• Clean design for efficient helicopter use
• Double thickness ends for durability
• Compression system to stablise load
• Triple stiched seams for long life
• "Roll up strap" for clean winching of an empty bag back to the helicopter. Watch clip below for more details.

Dimensions

• 130cm L x 30cm W x 30cm H

Weight

• 1.5kg

While Summit Gear products are shown as being in stock, we often have to make them to order. Please call (02 4782 3018) to confirm the timeframe to produce and ship your order.

The Winch 3 DOUBLE is a burly addition to the Summit Gear range of Winching Bags. It features a removable inner liner constructed of CT1000 (reinforced vinyl) for superior durability.

The Winch 3 has been designed in conjunction with remote area fire crews as a winching bag suitable for chainsaw kits. The "continuous" winching handle is full strength (not sewn into a seam) and therefore will never fail, regardless of the load in the bag. Given the heavy loads carried in this bag, we have intentionally excluded centre handles to stop one person carrying the bag and potentially injuring themselves. The Winch 2 must be carried by two people. This bag features no redundancies, and will continue to be a solid workhorse for years to come.

Features:

• Suitable for rake hoes without removable heads
• Removable CT1000 lining for superior durability. It is very easy to clean because the fabric will not absorb liquids (eg. fuel spills)
• Full strength winching / haul loop
• Clean design for efficient helicopter use
• Double thickness ends for durability
• Compression system to stablise load
• Triple stiched seams for long life
• "Roll up strap" for clean winching of an empty bag back to the helicopter. 

Dimensions

• 130cm L x 30cm W x 30cm H

Weight

• 3.2 kg

While Summit Gear products are shown as being in stock, we often have to make them to order. Please call (02 4782 3018) to confirm the timeframe to produce and ship your order.

Watch clip below for more details.

The Fire Ground Pack is designed to carry hydration, equipment and radios when working on the fire line.

Hydration bladder not included. Pictured bladder.

Features:

• 15 litre capacity
• Industrial strength harness system provides all day load carrying comfort
• Two external radio holders fit radios of various sizes
• Internal hydration sleeve fits a 3 litre reservoir
• Hydration port
• Zippered opening provides easy access. YKK #10 zip is extremely strong

Weight - 650 grams

Dimensions - 44cm high x 26cm wide x 14cm deep

Hydration reservoir not included.

While Summit Gear products are shown as being in stock, we often have to make them to order. Please call (02 4782 3018) to confirm the timeframe to produce and ship your order.

Need a duffel that will help to keep things dry? Made in the Blue Mountains just outside of Sydney - the Summit Gear Mega Raft Bag is made with CT1000 PVC so is really tough & water repellent.

Main fabric is a water impervious woven 1100D PVC coated Polyester that is UV stabilised. 

The zipper is protected using a PVC guard flap.

The Mega Raft bag includes a clear label holder, an unbreakable handle system and an internal end pocket for organisation.

With a selection of three sizes in the Raft Bag series, there is a Raft bag to suit your needs

Features:

• Single compartment Raft bag
• One internal pocket
• "Continuous handle" for strength
• Handles can be worn like a rucksack
• Locking YKK #10 zippers
• Clear External Label Holder
• Shoulder Strap
• Reflective stripe for night time visibility

Dimensions: 100cm x 30cm x 30cm

While Summit Gear products are shown as being in stock, we often have to make them to order. Please call (02 4782 3018) to confirm the timeframe to produce and ship your order.

The Summit Gear SCAT waistbag is a generous sized waistbag.

It can be worn independently; or clipped directly onto the outside of the SABRE rucksack or other backpack (or harness), allowing first aid gear to be accessed independently of the main pack.

It also can be used in large medical packs in place of the First Aid Loaves.

It features large reflective strip, space for organisation emblem, and carabiner loops to clip directly onto a harness.

Features:

Made with tough 1000 denier cordura (or can be made from 12 Ounce Australian made canvas)

Clear pouch for ID card (Dimensions 14cm x 14 cm with curved edging)

Large gauge YKK twin-zip slides for convenience

Specifications:

Volume = 9 litres -        34cm (w) x 18cm (d) x 15cm (h)

                                  13^3/8” (w) x 7^1/4” (d) x 5^7/8” (h)

Waist belt Dimensions:

Width:                         50mm

Length:                       84cm + Buckle: 9cm length

Total Waist                  123cm / 48^3/8”    
Circumference                     

Zipper Length              54 cm / 21^1/4”

Twin zipper:                Yes

Manufacturing Lead Time:

While Summit Gear products are shown as being in stock, we often have to make them to order. Please call (02 4782 3018) or email katoomba@summitgear.com.au to confirm the timeframe to produce and ship your order.

Similar, complimentary or other products you might be interested in:

Summit Gear Sabre Pack Cordura:

https://summitgear.com.au/products/summit-gear-sabre-pack-cordura?_pos=2&_sid=662137f58&_ss=r

Summit Gear Cannulation Waist Bag:

https://summitgear.com.au/products/summit-gear-cannulation-waist-bag?_pos=2&_sid=7414ad656&_ss=r

Summit Gear Waistbag Large

https://summitgear.com.au/products/summit-gear-waistbag-large?_pos=1&_sid=e003cb93d&_ss=r

Summit Gear Waistbag Medium

https://summitgear.com.au/products/summit-gear-waistbag-medium?_pos=2&_sid=e003cb93d&_ss=r

The Summit Gear RFS Blower Bag has been designed in conjunction with NSW RFS Remote Area Fire Crews as a winching bag suitable for carrying petrol powered leaf blowers. The "continuous" winching handle is full strength (not sewn into a seam) and therefore will never fail, regardless of the load in the bag. The RFS Blower Bag features end carry handles for easy lifting.

Features:

• Suitable for petrol powered leaf blowers
• Full strength winching / haul loop
• Stiffened base panel supports load and provides extra durability, and security when winching
• Internal compression straps to secure load
• Internal pockets for oil and fuel bottles (sold separately)
• Compression system to stabilise load
• Triple stitched seams for long life

Dimensions: 90cm (long) x 50cm (wide) x 38cm (high)

While Summit Gear products are shown as being in stock, we often have to make them to order. Please call (02 4782 3018) to confirm the timeframe to produce and ship your order.

The Summit Gear SCAT pack is a very popular remote area and rescue first aid pack. The SCAT pack features improved load protection and large external pockets.

Features:

• Two large external zippered pockets.
• Two internal flat pockets and internal sleeve pocket.
• Foam reinforced base to protect equipment.
• Comfortable harness folds away when not in use.
• Red haul loop is designed and strengthened for helicopter winching.

• oxygen cylinder sleeve.
• removable loaves with clear front and side for easy equipment identification.
• bags for ventilation kits. 

Please contact us for information.

Diemnsions: 65cm height x 35cm wide x 20cm deep

While Summit Gear products are shown as being in stock, we often have to make them to order. Please call (02 4782 3018) to confirm the timeframe to produce and ship your order.

The Summit Gear Fire Hose bag allows for easy packing, winching and carrying of fire hoses into remote areas.

Features:

• Fits two hoses.
• Semi rigid structure allows for easy flaking of hose into bag.
• End pockets fit connectors.
• Large lid design will cover a third hose if you need to lug a massive load.
• Strong winching point for helicopter operations.

While Summit Gear products are shown as being in stock, we often have to make them to order. Please call (02 4782 3018) to confirm the timeframe to produce and ship your order.

The Summit Gear Pump Winch Bag has been designed in conjunction with Tasmanian Fire Crews as a winching bag suitable for pumps and accessories. This model has a unique list of features that makes it our most durable and protective chainsaw winch bag in the range. We expect these bags to outlast all other designs on the market.

Features:

• Removable CT1000 liner provides an extra layer of fabric. This prevents wear, and is easy to clean. 
• Cordura (1000 denier) outer bag is extremely robust. In our 30+ years of manufacturing, we have found that 1000 denier Cordura presents the best wear characteristic over all other fabrics.
• Padded lid and base provides impact resistance. We can install a stiffened base panel (HDPE sheet and alloy flat bar) on request. 
• External Clear Window pouch for ID.
• Internal Clear Window pouch for contents list.
• Suitable for pumps, fuel and accessories.
• Full strength winching / haul loop.
• Separate carry handles to winch loop.
• Clean design for efficient helicopter use.
• Triple stiched seams, YKK #10 zips for long life.
• Please note that this bag configuration can be produced in other dimensions. Contact us for details.

Dimensions:

• 55 cm x 40 cm x 40 cm

Weight:

• 2.8 kg approximately

While Summit Gear products are shown as being in stock, we often have to make them to order. Please call (02 4782 3018) to confirm the timeframe to produce and ship your order.

Designed to be clipped to a belt or harness with accessory carabiners. It has 3 zip compartments on the front and 1 zip compartment on the back. 

Made from tough 1000D cordura.

Available in left and right configurations (the zip positions and directions are mirror reversed for wearing on each side of your body).

While Summit Gear products are shown as being in stock, we often have to make them to order. Please call (02 4782 3018) to confirm the timeframe to produce and ship your order.

The Summit Gear Strop Pouch is designed to partner with the Strop Winch Bag. It has a large zip opening, ID pouch and clear top window. 

Mad from 1000 denier Cordura and clear PVC with large gauge YKK zip.

Strops not included.

While Summit Gear products are shown as being in stock, we often have to make them to order. Please call (02 4782 3018) to confirm the timeframe to produce and ship your order.

Helicopter winch bag for lifting strops and similar items. It features a removable inner liner constructed of CT1000 (reinforced vinyl) for superior durability.

2 compression straps and carry handles at each end. ID pouch externally and paperwork pouch internally.

The Strop Pouch shown is sold separately. Strops not included.

While Summit Gear products are shown as being in stock, we often have to make them to order. Please call (02 4782 3018) to confirm the timeframe to produce and ship your order.

Oxygen bottle sleeve with Velcro style loop field for securing oxygen bottles in the Summit Gear Oxysock

While Summit Gear products are shown as being in stock, we often have to make them to order. Please call (02 4782 3018) to confirm the timeframe to produce and ship your order.