Distinguishing features: sensitive, precise, structured. The perfect balance. Technical climbing shoe with innovative closure, consisting of two Velcro straps with differentiated and opposite pull direction. Ideal for multi-purpose use in the mountains, crags and bouldering. The successful combination of synthetic and natural materials provides the best compromise between comfort, technical performance and inalterability in the long run. A special midsole with prehensile area under the toe provides optimal edging support, increasing sensitivity.

Upper:
Suede leather combined with microfiber, slip lasted.
Lining:
Dentex in the back, Pacific in the front.
Fit:
Medium.
Midsole:
LaSpoFlex 1,1 mm total.
Sole:
Vibram® XS Edge 4 mm
Sizes:
33 - 46 (including half sizes)
Weight:
450 g (pair, size 39)

The Dragon's striking TripleGrip cam lobes feature an increased contact area with a raw aluminium finish and additional bite points. These features work together to increase friction between the cam lobe and the rock it's placed in. This increases holding power and reduces walking, particularly in slick or soft rock types and marginal placements. Single stem, dual axle design gives Dragon cams 360° flexibility and a substantial expansion range, increasing performance in sub-optimal placements and helping you get the right piece first time. The Dragon cams hot-forged thumb press gives stable handling and reduces fumbling from gloved hands and pumped fingers. It allows the Dragon to have an extendable sling with no strength penalty, reducing the number of quickdraws needed to extend placements and minimising rack weight.

• Colour coded for easy size identification
• The DMM protection range is colour coded for quick and easy size selection. Colours are co-ordinated across passive and active protection, for quick selection of alternatives if your first choice doesn't fit.
• Ergonomic thumb press gives stable handling
• TripleGrip lobes for increased holding power and reduced walking
• Extendable sling reduces rope drag and rack weight
• Dual axle design for expanded range

WOMENS SUPERSTRETCH

3/2mm Steamer WS8

• 2mm superstretch panels arms, under arms and shoulders, 3mm the rest
• Flatlock stitching
• Textured knee pads
• Adjustable neck closure

The Summit Gear Factory is currently inundated with orders from the emergency services so our order lead time is around 8-10 weeks. Thank you for your patience.

Introducing the Summit Gear Canyonita canyon pack, the smaller sibling to our super popular Canyon rucksack. The Canyonita utilises the same famous mesh sides that offer unparalleled water drainage. Its smaller capacity should appeal to Canyoners who prefer to travel fast and light, those that eschew wetsuits, or those who make their mates carry all the ropes!

The goals of a canyoning pack are to provide carrying comfort, dry bag protection, space to carry out wet gear after the canyon, and the ability to flush any water that it takes on. We have solved the issue by installing mesh sides within the side panels to acheive the most rapid water exit ever achieved with a canyoning pack. This has been achieved without any loss of the legendary Summit Gear durability. We are justifiably proud of this design.

Features:

• Single compartment, top loading canyoning rucksack
• Mesh sides + drainholes for quick water drainage
• One external pocket (in lid)
• Waterbladder sleeve
• Perfect capacity for canyoning

Harness sizes :

• S/M for shorter people
• M/L for taller folks

Capacity :

• S/M : 40 litres
• M/L : 45 litres

Weight : 1.2 kg

Optional Framesheet: Our Canyon series packs have a closed cell foam back pad. This pad is quite comfortable, and a flexible pack can be very comfortable when moving through the canyons. We offer an optional framesheet, which utilises an HDPE back panel with 6061-T6 Alloy bar. This framesheet can be custom moulded to the user's back. It is very comfortable when carrying heavier loads as it adds to stability and hiploading. It can be inserted and removed from the Canyon packs at any time, so you may wish to purchase the framesheet and use it for the big days, then remove it for a lighter, more flexible pack at other times.

While Summit Gear products are shown as being in stock, we often have to make them to order. Please call (02 4782 3018) to confirm the timeframe to produce and ship your order.

The Summit Gear Factory is currently inundated with orders from the emergency services so our order lead time is around 8-10 weeks. Thank you for your patience.

Is this the ultimate canyoning pack? The goals of a canyoning pack are to provide carrying comfort, dry bag protection, space to carry out wet gear after the canyon, and the ability to flush any water that it takes on. We have solved the issue by installing mesh sides behind the black cordura sides to acheive the most rapid water exit ever achieved with a canyoning pack. This has been achieved without any loss of the legendary Summit Gear durability. We are justifiably proud of this design.

Features:

• Single compartment, top loading canyoning rucksack
• Mesh sides + drainholes for quick water drainage
• One external pocket (in hood)
• Waterbladder sleeve
• Perfect capacity for canyoning

Harness sizes :

• S/M for shorter people
• M/L for taller folks

 Capacity:

• S/M : 50 litres
• M/L : 55 litres

Weight: 1.5kg

Fabric : 1000 denier Cordura

Optional Framesheet: Our Canyon series packs have a closed cell foam back pad. This pad is quite comfortable, and a flexible pack can be very comfortable when moving through the canyons. We offer an optional framesheet, which utilises an HDPE back panel with 6061-T6 Alloy bar. This framesheet can be custom moulded to the user's back. It is very comfortable when carrying heavier loads as it adds to stability and hiploading. It can be inserted and removed from the Canyon packs at any time, so you may wish to purchase the framesheet and use it for the big days, then remove it for a lighter, more flexible pack at other times.

While Summit Gear products are shown as being in stock, we often have to make them to order. Please call (02 4782 3018) to confirm the timeframe to produce and ship your order.

A high performance women's climbing shoe with a hook-and-loop closure system for amazing edging control and pocket climbing performance.

Easy on and off convenience makes this sporty, high-end edging and smearing shoe a must for bouldering and technical climbing. We pulled key design elements from the Miura and incorporated them into this three strap hook-and-loop closure system. The one-piece leather upper has a synthetic lining to control stretch and is unlined under the foot to allow for excellent sensitivity on micro edges and smears. The Miura VS is built with the P3® platform for a continued down turn shape which makes it excellent for steep overhangs.

• Ideal terrain: Overhanging sport routes, bouldering, gym climbing and technical face climbing
• Slingshot Rand and Powerhinge System gives you the ultimate edging power
• 4mm Vibram® XS Grip2™ sticky rubber outsole
• AWARDS: Climbing Magazine - Editors' Choice, Rock and Ice - Best in Gear

• Screw Lock (S)- the manual screw lock on the gate is controlled simply using one hand. Once the
  screw lock in the upper part of the carabiner is rotated down onto the gate,
  the carabiner can be opened. 

• Keylock is a design point on the carabiner where the body meets the gate and locks. The keylock design locks securely and does not catch slings, ropes or harnesses. O pening and closing the carabiners is very simple.

• Each carabiner has its own unique identification number within each manufacturing order. This number will improve registration and review of metal products during regular inspection checks.

Liquid chalk gives you the edge on long routes. It is more effective over time, and more resistant to wearing off than dry chalk. Liquid chalk forms a layer on your hands that prevents sweat from getting through and loosening your grip on the holds.

These thin 8mm Dynatec slings are just as strong as their thicker variants. They can be used for narrow thread protection and to generally reduce weight.

Katana woman uses a technology designed by La Sportiva team to condense the precision and comfort of the famous Katana model in a version 100% women's fit. Technical climbing shoe with innovative closure, consisting of two Velcro straps with differentiated and opposite pull direction. Ideal for multi-purpose use in the mountains, crags and bouldering. The successful combination of synthetic and natural materials provides the best compromise between comfort, technical performance and inalterability in the long run. A special midsole with prehensile area under the toe provides for optimal edging support, increasing sensitivity. A Vibram sole with Xs Grip2 for maximum grip. These features make the Katana Woman shoe ideal for climbers who love climbing in all its forms, from bouldering to the crag and classical climbing routes on the wall.

Upper:
Suede leather combined with microfiber, slip lasted.
Lining:
Dentex in the back, Pacific in the front.
Midsole:
LoSpoFlex 0,8 mm total
Sole:
Vibram XS Grip2 sp. 4 mm
Sizes:
33 - 43 (including half sizes)
Weight:
430 g (pair, size 39)

A high performance lace-up climbing shoe for edging control and pocket climbing performance.

In the line for over 10 years, the Miura is the perfect tool for performance footwork whether it be on slabs, vertical or overhanging steep rock. The high tensioned Slingshot Rand is tied into the Powerhinge on the sole so that when small edges are weighted the shoe stretches in the back half of the shoe and not in the front. This allows you to stick on the smallest edges you can find or imagine! The multi-paneled lining gives you the perfect fit and the speed lacing system laces up in a cinch.

• Slingshot rand connected to the powerhinge under the shoe to keep you on edges
• Speed lacing system for quick lace-ups
• 8-panel directional lining for channeling stretch
• Ideal terrain: Overhanging sport routes, bouldering, gym climbing and technical face climbing

AWARDS: Super Topo - Editors' Choice 2010

FIT: Performance with high asymmetry

UPPER: Leather

LINING: Dentex

MIDSOLE: 1.1mm LaspoFlex (forefoot only)

SOLE: 4mm Vibram® XS Edge™

Alloy Offsets 7-11 Weight 195g

Conventional nuts don’t seat well in flared cracks, so DMM made one that did, and this is it. 

The design has been updated by dropping the wire into a recess with a full radius to keep it protected and give extra strength.

Additionally weight was reduced with lightening holes on the two larger sizes. On slightly flared placements nothing fits like an Offset. Get a set as a back up for your Wallnuts and prepare to be converted.

Classic lightweight belay rappel/device.

Unique, smooth-handling geometry

Minimalist design is durable in all conditions

Large surface area dissipates heat when lowering or rappelling

Handles ropes from 7.7 to 11 mm

The Beta EVO replaces the iconic original BetaStick, which was designed to smoothly and efficiently remote-clip bolts. Almost entirely redesigned, the EVO not only improves on the design and durability but also offers up increased functionality.

Whilst still providing the same simple, extendable reach and reliable carabiner ‘holstering’, the EVO features a more sturdy, grooved pole construction which  incorporates a flick-lock mechanism, rather than the less reliable twist-lock used on the previous version. This offers both improved locking/hold (no chance of ‘spinning’) and is also quicker and easier to adjust. On top of this principal upgrade, the EVO also offers a host of improved features.

Features

• Capacity for lasso clipping and quickdraw removal
• Integral hooking feature for rope retrieval
• Compatible with a wider range of snap gate carabiners – both solid and wire gate
• A dual position spring to securely retain carabiners of differing sizes
• A more ergonomically angled head to easily access bolt hangers in difficult clipping situations
• Now clips to harness head fist, making it more stable and less likely to get damaged

The Beta EVO replaces the iconic original BetaStick, which was designed to smoothly and efficiently remote-clip bolts. Almost entirely redesigned, the EVO not only improves on the design and durability but also offers up increased functionality.

Whilst still providing the same simple, extendable reach and reliable carabiner ‘holstering’, the EVO features a more sturdy, grooved pole construction which  incorporates a flick-lock mechanism, rather than the less reliable twist-lock used on the previous version. This offers both improved locking/hold (no chance of ‘spinning’) and is also quicker and easier to adjust. On top of this principal upgrade, the EVO also offers a host of improved features.

Features

• Capacity for lasso clipping and quickdraw removal
• Integral hooking feature for rope retrieval
• Compatible with a wider range of snap gate carabiners – both solid and wire gate
• A dual position spring to securely retain carabiners of differing sizes
• A more ergonomically angled head to easily access bolt hangers in difficult clipping situations
• Now clips to harness head fist, making it more stable and less likely to get damaged