Emergency Services Fire Winch and Gear Bags

The Summit Gear TAS Fire Chainsaw Bag has been designed in conjunction with Tasmanian Fire Crews as a winching bag suitable for large chainsaws and accessories. This model has a unique list of features that makes it our most durable and protective chainsaw winch bag in the range. We expect these bags to outlast all other designs on the market.

Features:

• Removable CT1000 liner provides an extra layer of fabric. This prevents wear, and is easy to clean. 
• Cordura (1000 denier) outer bag is extremely robust. In our 30+ years of manufacturing, we have found that 1000 denier Cordura presents the best wear characteristic over all other fabrics.
• Padded lid and base provides impact resistance. We can install a stiffened base panel (HDPE sheet and alloy flat bar) on request. 
• Two internal pockets for fuel bottles.
• Two large internal pockets to separate other equipment.
• External Clear Window pouch for ID.
• Internal Clear Window pouch for contents list.
• Suitable for chainsaw kits.
• Full strength winching / haul loop.
• Separate carry handles to winch loop.
• Clean design for efficient helicopter use.
• Triple stiched seams, YKK #10 zips for long life.
• Please note that this bag configuration can be produced in other dimensions. Contact us for details.

Dimensions:

• 116 cm x 34 cm x 34 cm

Weight:

• 3.5 kg approximately

While Summit Gear products are shown as being in stock, we often have to make them to order. Please call (02 4782 3018) to confirm the timeframe to produce and ship your order.

The Winch 3 DOUBLE is a burly addition to the Summit Gear range of Winching Bags. It features a removable inner liner constructed of CT1000 (reinforced vinyl) for superior durability.

The Winch 3 has been designed in conjunction with remote area fire crews as a winching bag suitable for chainsaw kits. The "continuous" winching handle is full strength (not sewn into a seam) and therefore will never fail, regardless of the load in the bag. Given the heavy loads carried in this bag, we have intentionally excluded centre handles to stop one person carrying the bag and potentially injuring themselves. The Winch 2 must be carried by two people. This bag features no redundancies, and will continue to be a solid workhorse for years to come.

Features:

• Suitable for rake hoes without removable heads
• Removable CT1000 lining for superior durability. It is very easy to clean because the fabric will not absorb liquids (eg. fuel spills)
• Full strength winching / haul loop
• Clean design for efficient helicopter use
• Double thickness ends for durability
• Compression system to stablise load
• Triple stiched seams for long life
• "Roll up strap" for clean winching of an empty bag back to the helicopter. 

Dimensions

• 130cm L x 30cm W x 30cm H

Weight

• 3.2 kg

While Summit Gear products are shown as being in stock, we often have to make them to order. Please call (02 4782 3018) to confirm the timeframe to produce and ship your order.

Watch clip below for more details.

This bag is a burly addition to the Summit Gear range of Winching Bags. It features a removable inner liner constructed of CT1000 (reinforced vinyl) for superior durability.

This bag has been designed in conjunction with remote area fire crews as a winching bag suitable for rake hoes with non-removable heads. The "continuous" winching handle is full strength (not sewn into a seam) and therefore will never fail, regardless of the load in the bag. Given the heavy loads carried in this bag, we have intentionally excluded centre handles to stop one person carrying the bag and potentially injuring themselves. It must be carried by two people. This bag features no redundancies, and will continue to be a solid workhorse for years to come.

Features:

• Suitable for rake hoes without removable heads
• Removable CT1000 lining for superior durability. It is very easy to clean because the fabric will not absorb liquids (eg. fuel spills)
• Full strength winching / haul loop
• Clean design for efficient helicopter use
• Double thickness ends for durability
• Compression system to stablise load
• Triple stiched seams for long life
• "Roll up strap" for clean winching of an empty bag back to the helicopter. 

Dimensions

• 130cm L x 30cm W x 30cm H
• Fits a 130cm long rake hoe with a fixed head

Weight

• 3.2 kg

While Summit Gear products are shown as being in stock, we often have to make them to order. Please call (02 4782 3018) to confirm the timeframe to produce and ship your order.

While Summit Gear products are shown as being in stock, we often have to make them to order. Please call (02 4782 3018) to confirm the timeframe to produce and ship your order.

he Winch 2 DOUBLE is a burly addition to the Summit Gear range of Winching Bags. It features a removable inner liner constructed of CT1000 (reinforced vinyl) for superior durability.

The Winch 2 has been designed in conjunction with remote area fire crews as a winching bag suitable for chainsaw kits. The "continuous" winching handle is full strength (not sewn into a seam) and therefore will never fail, regardless of the load in the bag. Given the heavy loads carried in this bag, we have intentionally excluded centre handles to stop one person carrying the bag and potentially injuring themselves. The Winch 2 must be carried by two people. This bag features no redundancies, and will continue to be a solid workhorse for years to come.

Features:

• Suitable for chainsaw kits
• Removable CT1000 lining for superior durability. It is very easy to clean because the fabric will not absorb liquids (eg. fuel spills)
• Full strength winching / haul loop
• Clean design for efficient helicopter use
• Double thickness ends for durability
• Compression system to stablise load
• Triple stiched seams for long life
• "Roll up strap" for clean winching of an empty bag back to the helicopter. Watch clip below for more details.

Dimensions: 90cm x 30cm x 30cm

Weight: 2.4kg

While Summit Gear products are shown as being in stock, we often have to make them to order. Please call (02 4782 3018) to confirm the timeframe to produce and ship your order.

The Summit Gear Pump Winch Bag has been designed in conjunction with Tasmanian Fire Crews as a winching bag suitable for pumps and accessories. This model has a unique list of features that makes it our most durable and protective chainsaw winch bag in the range. We expect these bags to outlast all other designs on the market.

Features:

• Removable CT1000 liner provides an extra layer of fabric. This prevents wear, and is easy to clean. 
• Cordura (1000 denier) outer bag is extremely robust. In our 30+ years of manufacturing, we have found that 1000 denier Cordura presents the best wear characteristic over all other fabrics.
• Padded lid and base provides impact resistance. We can install a stiffened base panel (HDPE sheet and alloy flat bar) on request. 
• External Clear Window pouch for ID.
• Internal Clear Window pouch for contents list.
• Suitable for pumps, fuel and accessories.
• Full strength winching / haul loop.
• Separate carry handles to winch loop.
• Clean design for efficient helicopter use.
• Triple stiched seams, YKK #10 zips for long life.
• Please note that this bag configuration can be produced in other dimensions. Contact us for details.

Dimensions:

• 55 cm x 40 cm x 40 cm

Weight:

• 2.8 kg approximately

While Summit Gear products are shown as being in stock, we often have to make them to order. Please call (02 4782 3018) to confirm the timeframe to produce and ship your order.

Helicopter winch bag for lifting strops and similar items. It features a removable inner liner constructed of CT1000 (reinforced vinyl) for superior durability.

2 compression straps and carry handles at each end. ID pouch externally and paperwork pouch internally.

The Strop Pouch shown is sold separately. Strops not included.

While Summit Gear products are shown as being in stock, we often have to make them to order. Please call (02 4782 3018) to confirm the timeframe to produce and ship your order.

The Summit Gear RFS Blower Bag has been designed in conjunction with NSW RFS Remote Area Fire Crews as a winching bag suitable for carrying petrol powered leaf blowers. The "continuous" winching handle is full strength (not sewn into a seam) and therefore will never fail, regardless of the load in the bag. The RFS Blower Bag features end carry handles for easy lifting.

Features:

• Suitable for petrol powered leaf blowers
• Full strength winching / haul loop
• Stiffened base panel supports load and provides extra durability, and security when winching
• Internal compression straps to secure load
• Internal pockets for oil and fuel bottles (sold separately)
• Compression system to stabilise load
• Triple stitched seams for long life

Dimensions: 90cm (long) x 50cm (wide) x 38cm (high)

While Summit Gear products are shown as being in stock, we often have to make them to order. Please call (02 4782 3018) to confirm the timeframe to produce and ship your order.

The Summit Gear RFS Chainsaw Winch Bag has been designed in conjunction with NSW RFS Remote Area Fire Crews as a winching bag suitable for chainsaw kits. This model differs from our Winch 2 bag in that it has an alloy reinforced HDPE base which affords the bag great rigidity and offers an extra level of wear reisitance. The blue Camlon fabric in the base of the bag is very tough and oil resistant. Two end pockets are suitable for oil and fuel bottles.

Features:

• Suitable for chainsaw kits
• Full strength winching / haul loop
• Internal straps to hold chainsaw in place
• Solid frame in base
• Clean design for efficient helicopter use
• Double thickness ends for durability
• Compression system to stablise load
• Triple stiched seams for long life

Dimensions: 90cm x 30cm x 30cm

While Summit Gear products are shown as being in stock, we often have to make them to order. Please call (02 4782 3018) to confirm the timeframe to produce and ship your order.

The Summit Gear Winch 3 bag has been designed in conjunction with remote area fire crews as a winching bag suitable for rake hoe kits. The "continuous" winching handle is full strength (not sewn into a seam) and therefore will never fail, regardless of the load in the bag. Given the heavy loads carried in this bag, we have intentionally excluded centre handles to stop one person carrying the bag and potentially injuring themselves. The Winch 3 must be carried by two people. This bag features no redundancies, and will continue to be a solid workhorse for years to come.

Features:

• Suitable for rake hoes without removable heads
• Full strength winching / haul loop
• Clean design for efficient helicopter use
• Double thickness ends for durability
• Compression system to stablise load
• Triple stiched seams for long life
• "Roll up strap" for clean winching of an empty bag back to the helicopter. Watch clip below for more details.

Dimensions

• 130cm L x 30cm W x 30cm H

Weight

• 1.5kg

While Summit Gear products are shown as being in stock, we often have to make them to order. Please call (02 4782 3018) to confirm the timeframe to produce and ship your order.

This bag has been designed in conjunction with remote area fire crews as a winching bag suitable for rake hoes with non-removable heads. The "continuous" winching handle is full strength (not sewn into a seam) and therefore will never fail, regardless of the load in the bag. Given the heavy loads carried in this bag, we have intentionally excluded centre handles to stop one person carrying the bag and potentially injuring themselves. It must be carried by two people. This bag features no redundancies, and will continue to be a solid workhorse for years to come.

Features:

• Suitable for rake hoes without removable heads
• Full strength winching / haul loop
• Clean design for efficient helicopter use
• Double thickness ends for durability
• Compression system to stablise load
• Triple stiched seams for long life
• "Roll up strap" for clean winching of an empty bag back to the helicopter. Watch clip below for more details.

Dimensions

• 130cm L x 30cm W x 30cm H
• Fits a 130cm long rake hoe with a fixed head

Weight

• 1.5kg

While Summit Gear products are shown as being in stock, we often have to make them to order. Please call (02 4782 3018) to confirm the timeframe to produce and ship your order.

The Aviation Cabin bag has been designed in conjunction with National Parks Helicopter crews. This is the perfect size bag to sit in the cockpit with a radio and drink bottle holders on opposite ends. The Aviation Cabin Bag has a clear UV treated PVC sleeve on the back that you can easily use to store a map and/or ipad. The bag has two main compartments, each with internal clear organisation sleeves. Purchase with a Life Venture Thermal Mug and you have the perfect setup for your next flight.

Designed and Made in Australia with tough 12 Ounce Australian made canvas and 1000 denier cordura.

The grab handles are made using a single loop construction which makes them virtually unbreakable.

Dimensions are 370mm Wide, 290mm High and 130mm deep.

Colours available are Sand, Olive Green, Royal Blue and Navy Blue.

While Summit Gear products are shown as being in stock, we often have to make them to order. Please call (02 4782 3018) to confirm the timeframe to produce and ship your order.

The Winch 2 has been designed in conjunction with remote area fire crews as a winching bag suitable for chainsaw kits. The "continuous" winching handle wraps around the entire bag (not just sewn into a seam). Given the heavy loads carried in this bag, we have intentionally excluded centre handles to stop one person carrying the bag and potentially injuring themselves. The Winch 2 must be carried by two people. This bag will continue to be a solid workhorse for years to come.

Features:

• Suitable for chainsaw kits
• Full strength winching / haul loop
• Clean design for efficient helicopter use
• Double thickness ends for durability
• Compression system to stablise load
• Triple stiched seams for long life
• "Roll up strap" for clean winching of an empty bag back to the helicopter. Watch clip below for more details.

Dimensions: 90cm x 30cm x 30cm

Weight: 1.1kg

While Summit Gear products are shown as being in stock, we often have to make them to order. Please call (02 4782 3018) to confirm the timeframe to produce and ship your order.

The Summit Gear RFS Pump Bag has been designed in conjunction with NSW RFS Remote Area Fire Crews as a winching bag suitable for pump kits. This model differs from our Winch 2 bag in that is has an alloy reinforced HDPE base which affords the bag great rigidity and offers an extra level of wear resistance. The blue Camlon fabric in the base of the bag is very tough and oil resistant. Two end pockets are suitable for oil and fuel bottles.

Features:

• Suitable for pump kits
• Full strength winching / haul loop
• Internal straps to hold pump in place
• Solid frame in base
• Clean design for efficient helicopter use
• Double thickness ends for durability
• Compression system to stabilise load
• Triple stiched seams for long life

Dimensions: 95cm x 30cm x 30cm

While Summit Gear products are shown as being in stock, we often have to make them to order. Please call (02 4782 3018) to confirm the timeframe to produce and ship your order.

The Summit Gear Rake Hoe Bag has been designed in conjunction with NSW RFS Remote Area Fire Crews as a winching bag suitable for carrying rake hoes. The "continuous" winching handle is full strength (not sewn into a seam) and therefore will never fail, regardless of the load in the bag. The Rake Hoe Bag bag features side carry handles for easy lifting by one person. The bag is suitable for use with rake hoes that have removable heads only.

Features:

Suitable for rake hoes with removable heads
Full strength winching / haul loop
Clean design for efficient helicopter use
Double thickness base and ends for excellent durability
Compression system to stablise load
Triple stitched seams for long life
Dimensions: 130cm (long) x 20cm (wide) x 15cm (high)

While Summit Gear products are shown as being in stock, we often have to make them to order. Please call (02 4782 3018) to confirm the timeframe to produce and ship your order.

Need to winch a 10L - 20L Jerry Can?  This Summit Gear Winch Bag is designed and manufactured to be attached to a helicopter winching apparatus via the winch loop that is constructed is a single loop that circumferences the entire bag and is readily identifiable by the red cordura handles. The Winch Loop is constructed of a minimum 2200kg breaking strain 50mm webbing. Winching bags have been tested to failure at 900kg (the load at which the bag begins to separate from the winch loop). Winch loops feature Cordura reinforcement for durability.

The bag is fully lined with heavy duty and water impervious CT1000 PVC fire retardant fabric that makes it easy to wipe out if there are any spills 

The outer fabric is 1000 denier Cordura. Is a high tenacity nylon fabric. It displays unparalleled abrasion and tear resistance. The bag is fully enclosed with a YKK #10 coil zipper with locking zipper slides.

A strip of reflective tape has been added to the bag for increased visability and there are two drainage holes that have been inserted in the bottom of the winch bag.

The winch loop has also been designed to be a length that makes a great carry handle to easily move the bag when it has a jerry can enclosed inside it.

The Summit Gear Fire Hose bag allows for easy packing, winching and carrying of fire hoses into remote areas.

Features:

• Fits two hoses.
• Semi rigid structure allows for easy flaking of hose into bag.
• End pockets fit connectors.
• Large lid design will cover a third hose if you need to lug a massive load.
• Strong winching point for helicopter operations.

While Summit Gear products are shown as being in stock, we often have to make them to order. Please call (02 4782 3018) to confirm the timeframe to produce and ship your order.

Need a duffel that will help to keep things dry? Made in the Blue Mountains just outside of Sydney - the Summit Gear Mega Raft Bag is made with CT1000 PVC so is really tough & water repellent.

Main fabric is a water impervious woven 1100D PVC coated Polyester that is UV stabilised. 

The zipper is protected using a PVC guard flap.

The Mega Raft bag includes a clear label holder, an unbreakable handle system and an internal end pocket for organisation.

With a selection of three sizes in the Raft Bag series, there is a Raft bag to suit your needs

Features:

• Single compartment Raft bag
• One internal pocket
• "Continuous handle" for strength
• Handles can be worn like a rucksack
• Locking YKK #10 zippers
• Clear External Label Holder
• Shoulder Strap
• Reflective stripe for night time visibility

Dimensions: 100cm x 30cm x 30cm

While Summit Gear products are shown as being in stock, we often have to make them to order. Please call (02 4782 3018) to confirm the timeframe to produce and ship your order.

Need a duffel that will help to keep things dry? Made in the Blue Mountains just outside of Sydney - the Summit Gear Raft Bag is made with CT1000 PVC so is really tough & water repellent.

Main fabric is a water impervious woven 1100D PVC coated Polyester that is UV stabilised.

The zipper is protected using a PVC guard flap.

The Raft bag includes a clear label holder, an unbreakable handle system and an internal end pocket for organisation.

With a selection of three sizes in the Raft Bag series, there is a Raft bag to suit your needs

Features:

• Single compartment Raft bag
• One internal pocket
• "Continuous handle" for strength
• Handles can be worn like a rucksack
• Locking YKK #10 zippers
• Clear External Label Holder
• Shoulder Strap
• Reflective stripe for night time visibility

Dimensions: 80cm x 30cm x 30cm

While Summit Gear products are shown as being in stock, we often have to make them to order. Please call (02 4782 3018) to confirm the timeframe to produce and ship your order.